Mtn. Man Mask (Thread #12 eyes) Pic #1) Here I have drawn in the lower part of the upper eyelids
Pic #2) With a detail knife stop cut this line. You want to take this cut about 1/16-inch deep.
Pic#3) Stop cuts cut in on both lids.
Pic #4) With the detail knife cut up to the stop cuts.Maintain the roundness as you do these cuts. Concentrate on taking a elongated like triangle shape out of each corner. This is the inside corner.
Pic #5) This next photo shows the cut on the outside corner. When you are finished with these two cuts on the eyes you should be able to see a little part of the center line we had drawn in for the eyes when we started.
Last edited by Mark Gargac : 04-16-2006 at 11:57 PM.
|