new member

mkoziol123 · #1 02-12-2008, 03:39 PM

I am 65 yrs young and would like to learn woodcarving and how to use a air brush. so here goes. I hope it works out. Had trouble finding where to do this hope its the right place.Thank you for your understanding.

kitaye · #2 02-12-2008, 05:28 PM

WElcome to WCI. You'll find your questions will be answered sometimes before you even know what to ask. You'll get the know the lay of the place if you spend any time here.

Tom H · #3 02-12-2008, 06:47 PM

Welcome to the Board. Woodcarving and airbrush; combined could be interesting. Well, anyway, this is the place to be for woodcarvers and those who are trying.

Tom H

Mottles · #4 02-13-2008, 05:07 PM

Hello & welcome, looks like you did it just fine. Lot's of good folks and information here....so just go from forum to forum and ask questions.
Kathy

AlArchie · #5 02-13-2008, 08:01 PM

Welcome! Do you already have an airbrush and carving tools or will you be looking for advice on these items, too?

Al

mkoziol123 · #6 02-14-2008, 07:41 AM

I have some carving tools and a airbrush so any help on the carving part as to where to look for help and advice would be greatly appreciated

mkoziol123

slather · #7 02-16-2008, 01:17 PM

Welcome to the site, I myself just picked up an airbrush and am in the learning mode, have picked up a few pionters from the net. as far as where to look for pionters on carving look at the message board and on line carving classes or find a carving club in your area, should be some close to you .

Al

http://picasaweb.google.com/al.hillis/WOODCARVINGSMINE