[Hi_Ho_Sliver]

I like them all, especially like the face on the santa

[Mitchell]

Thanks for joining in Scott.

I combined the two threads to keep all your "Welcomes" in one place.

[Scott Hagerty]

Thanks for all the kind comments. Ron, I'm about 2 1/2 hours from Wichita and may have to look you up the next time I'm headed down there. On the spirals I carved 2 of them by hand, about 8 to 9 hours apiece then the guys talked me into trying the dremel. What a difference that made. Less than 2 hours in each one. I still like carving by hand better but may do more with the dremel in the future.

Thanks all
Scott

[Tom H]

Very nice carvings Scott. Don't know how I missed your posting, earlier. I can only hope that after 2 1/2 years of carving, mine will measure up like yours do.. Welcome aboard. Tom H

[GeorgiaCarver]

Scott, good to hear from you, thank you for posting your work. I look forward to getting to know you.

Greg

[wood-whittler]

scott,


hello and welcome to the board, you have some very nice work there also,thanks for sharing

bart

[mark yundt]

As far as new members go I might as well throw my hat in the ring as well. I am a full time carver, started out doing decoys as a hobby, lost my "real" job and went into carving full time. Been at it 15 yrs now.Not quite sure how this messaging stuff goes or how and if you can see my site but the address is www.woodworkingstudio.net check it out , It's a mix of work but fun and challenging.I've got a lot of work in the shop,,, many starting in clay as prototypes , a bunch of sketches, some casts,but again alot of fun. Let me know what you think. I look forward to hearing from you.