carving table

[drums57]

does anybody have plans or pictures for a carving table.one that is tall enough for standing. thanks

[Thor]

I didn't ever draw plans, but I have built 7 of these out of 2 X 4's and some plywood. They are about an inch or so less than elbow height, (I made one for someone much taller than me) and I use them for students as well as for myself.

I used salvaged wood from having built a house for the most part, but had to buy 1 sheet of 3/4" plywood to complete so many of them. They have a 2" overlap for clamps, and a small tray on one end so stuff can be out of the way and not roll off the table.

The one pictured with the plywood at the bottom is the one I take to demonstrations with me. It travels just fine, because it is so sturdy.

Christina

[Claude]

Welcome to the forum!

If you scroll all the way to the bottom of this page, you'll see an area where the computer has listed similar threads in the past. click on these links and see what has already been written.

Claude

[Gulf Coast Handyman]

Welcome Drums. Nice tables Christina, I like the tool holding area on the side.

Dave

[drums57]

thanks so much for all the advise.christina thats exactly what i was looking for:

[Thor]

The top measures 2feet by 3 feet if that helps.
C