Strops

Doug Ridley · #1 11-02-2005, 03:54 PM

Anybody use the slip strop and/or the Vee power strop? How well do they work?

Greyhair · #2 11-02-2005, 04:29 PM

I made a Burke type sharpener with a strop wheel. It does not excellant job for knives and outside edge of gouges. Look at the deluxe Burke machine on littleshavers.com web site it solves the problem of the inside edge of gouges with the second sharpening bar.

Plain_Ol_Ed · #3 11-03-2005, 02:09 PM

Take yourself a piece of basswood and carve the profiles you wish to strop into it. Apply stropping compound and away you go. Your very own custom made slip strop. If you happen to have a lathe, you can turn a piece of basswwod to match you tool profiles and use it to strop them.

Doug Ridley · #4 11-03-2005, 02:56 PM

Good idea, Ed. I do have a lathe and I think I'll try that.

Plain_Ol_Ed · #5 11-03-2005, 07:10 PM

I can't take credit for that, think Rick-in-Seattle was the one who brought it up originally.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clean strops	Frank Seeley	Wood Carving Tips and Techniques	12	11-09-2006 11:36 AM
sharpen strops	Frank Seeley	Off Topic	1	11-02-2006 11:55 AM
leather strops	Guest	Wood Carving for Beginners	11	05-28-2004 06:22 PM