Hi Ho,s blade protectors.

Bandaid · #1 09-22-2005, 11:54 AM

Hi Ho...I've been admiring the blade covers you have made for your knives. Are they one piece or are they laminated?

By the way, thats a beautiful set of knives you show in the gallery.

Reg

Hi_Ho_Sliver · #2 09-23-2005, 11:18 AM

Sorry...I didn't see this post! The protectors are two pieces, and I relieve the inside of each half and fit and cut etc until I get a snug fit.....I was using pieces of the magnetic business card at first, but hasn't been necessary with a snug fit....some suggest the round magnets, but I don't want my knife rubbing against the magnet each time I put it in the protector, will dull the blade I am afraid, the magnetic business cards are rubber so probably no problem except I suspect they have metal in them as well..so I decided to just fit them and so far has worked well.....Will Hayden says he just drills a hole in a protector and fills it with silicon and when dry puts the blade in that.......may try it just out of curiosity, but I am happy with these protectors, I have also made this same design for my chisels.....Dave (if you send me your email via a private message, I will see if I can send you the pictures I took step by step for one of these protectors..no promises...I am computer challenged! LOL)

Hi_Ho_Sliver · #3 09-23-2005, 11:22 AM

Thanks, sent you a reply on the protectors, thought I should put woodys website in case someone wants one of his knives www.woodysknives.com tell him I sent you..

kaiserb · #4 09-23-2005, 11:33 AM

Quote:

Originally Posted by Hi_Ho_Sliver

Thanks, sent you a reply on the protectors, thought I should put woodys website in case someone wants one of his knives www.woodysknives.com tell him I sent you..

Woody also sells on Ebay ...

You can get an awesome deal on a 3 knife set that way.

Bandaid · #5 09-23-2005, 06:04 PM

Thanks for the reply Dave.

Reg

Ron D · #6 09-23-2005, 06:47 PM

i thought they were gonna work,so i made some and they work awsome