         |  | Home Careers Club Search Message Board Carver Galleries Subscription Services |
Subscribe Today! |
Magazine |
Carving Community |
Testimonials What a wonderful magazine, every issue is like Christmas!... Continue |
Welcome to the Woodcarving Illustrated Message Board, an online wood carving forum community where you can join thousands of carvers from around the world discussing all things related to carving. To gain full access to the message board you must register for a free account.
As a registered member you will be able to:
If you have any problems with the registration process or your account login, please contact the Woodcarving Illustrated Message Board's Support Team. |
| |||||||
 Relief and Chip Carving | |||
 |
| | LinkBack (1) | Thread Tools | Display Modes |
|
#11
09-09-2002, 01:18 PM
| |||
| |||
 Re: Cutting down an edge To All, I finally got back to this project yesterday. Used Kutzal Gold burs to work the vertical and horizontal surfaces that need to be square. Moved alot of wood. When I was attempting to do this with my gouge and mallet it took me about an hour to do 2', with the 'power assist' I covered about 200 inches in 3 hours including beer breaks. And not as dusty as I thought it would be. Thanks to all for the artistic principle speeches regarding power tools. I am ready to finish this thing now that the garden is about done. ah chip  |
|
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
|
LinkBacks (?)
LinkBack to this Thread: http://www.woodcarvingillustrated.com/forum/f51/cutting-down-edge-4412/ | ||||
| Posted By | For | Type | Date | |
| Relief and Chip Carving [Archive] - Woodcarving Illustrated Message Board | This thread | Refback | 09-11-2007 12:48 AM | |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can a knife loose an edge sitting in a drawer? | photodog | Woodcarving Tools, Technology & Sharpening | 15 | 01-16-2007 09:32 PM |
| Magnets & cutting edge tools. | Thomp | Woodcarving Tools, Technology & Sharpening | 8 | 09-07-2006 12:44 AM |
| Power or edge tools? | rick-in-seattle | Woodcarving Tools, Technology & Sharpening | 26 | 02-25-2006 01:40 PM |
| knife edge type, Denny vs Flexcut | xsailer | Woodcarving Tools, Technology & Sharpening | 9 | 02-20-2006 10:05 AM |
| Scraper edge | Chuck_D | Woodcarving Tools, Technology & Sharpening | 3 | 04-19-2003 09:40 AM |
All times are GMT -4. The time now is 06:44 PM.
