Wood Carving Illistrated back issues

"Brian · #1 03-31-2005, 01:11 PM

Hello everyone,
I was wondering, if you have these's. I need back issues to complete my set. Here they are: #1, #3, #9, #17 and #18. ............... Send an e mail to: jb_corcoran@yahoo.ca, bpjc945@msn.com or phone me at 905-430-3691 in Whitby, Ontario.

Thank you kindly,

, Brian.

Anthony Filetti · #2 03-31-2005, 01:15 PM

Brian,

#3 and #18 can be bought off this website (see back issues) as far as #1
and #9 go your best bet would be to keep an eye on EBay...

Old_Gord · #3 03-31-2005, 01:24 PM

Hi Brian;
Have you tried Jan Oegema in Bowmanville, he has some back issues of WCI I believe, also WCI has Issue #3 and #18 listed as available on their web site.
Here's Jan's info if you don't already have it, guess he was at the Brooklin show this past weekend.(G)
http://www.janscarvingstudio.com

OG
BTW Brian your Yahoo address bounced.

OOPS Rocket , just saw your comments about the availability of #3 & #18.
OG
OOPS again apparently #3 is now sold out also.

OG

Anthony Filetti · #4 03-31-2005, 01:36 PM

OG...no problem, all this talk of back issues makes me wish I had 20 copies of #1!!!

Hi_Ho_Sliver · #5 03-31-2005, 01:38 PM

Good luck! I need issue #1 and 9 myself LOL

mikeg · #6 03-31-2005, 02:54 PM

I think that #3 should be listed as "sold out" at Fox Chapel, or it needs to be fixed so that you can order it. It's one of 3 that I need so I went over when I read the message here. (I bet you can guess what one of the other two that I need are!!

)

BobD, any idea whether or not it's sold out?

mikeg

BobD · #7 03-31-2005, 03:40 PM

I checked and #3 is sold out as well....Sorry!

Bob

carver6 · #8 03-31-2005, 11:56 PM

BobD,
It's Fox Chapel's fault. If they didn't do such a good job with the magazine they wouldn't sell out.LOL

BillinO · #9 04-02-2005, 02:16 PM

Bob, would it be possible, since several issues of WCI are sold out to put only the articles in the issues put on the board in a printable foremat? I know #1 and 9 are scarce as chicken teeth. Keep up the good work.

Bill in Omaha

Hi_Ho_Sliver · #10 04-02-2005, 03:04 PM

I think WCI should do a reprint, and for the sake of those keeping the original issues as collectors items....put in bold type on the front..2nd edition! that way collectors are protected, but also carvers that just want all the copies for the information can have them as well....this is just my opinion, but seems like common sense to me! That is of course assuming WCI likes to make money.....if not...welll then, just send me copies of all your books at no charge! ha ha